Reset brother drum message
Brother Printer Replace Drum and Reset Counter: A Comprehensive Tutorial
Ever encountered the “Replace drum” message on your Brother printer? It could be a bit frustrating, but there’s no need to worry, as we’ll be taking you through the steps of replacing your drum and resetting the printer’s counter.
First things first, you need to have a replacement drum for your printer. You can easily find these in most electronic stores or online retail shops. Once you have your replacement drum, follow the steps below:
Step 1: Open your printer’s front cover.
Most Brother printer models come with a front cover that can be easily opened to access the drum. After opening the cover, you should be able to see the toner cartridges and the drum.
Step 2: Remove the toner cartridges.
To remove the toner cartridges, gently press the release button and pull them out. Depending on your model, there could be up to four cartridges.
Step 3: Remove the drum.
You will then find a green handle on the drum unit. Hold this handle and pull the drum out.
Step 4: Replace the drum.
Insert the new drum into the printer and make sure it clicks in place.
Step 5: Reset the Drum Counter.
After replacing the drum, it’s essential to reset your printer’s drum counter. This is because your printer keeps track of the number of pages printed on each drum unit, and when it reaches a specific number, it sends the “Replace drum” message.
To reset the counter, follow these steps:
– Press and hold the “OK” button for about three seconds until the “Reset drum” message appears on the screen.
– Press the “Up” or “Down” arrow key to select “Yes.”
– Press “OK” to confirm the reset.
Congratulations, you have successfully replaced your drum unit and reset the counter.
But wait, there’s more!
Sometimes, even after replacing the drum, the printer might still send the “Replace drum” message. This could be because of the printer’s settings, which can easily be overridden.
To override the printer’s settings, follow these steps:
– Open your printer’s front cover again.
– Press and hold the “Go” button for about four seconds until all the LED lights turn on. Release the button.
– Press the “Go” button six times quickly.
– The toner, drum, and error LED lights will light up, indicating that you have successfully overridden the printer’s settings.
In conclusion, replacing your Brother printer’s drum unit might seem daunting, but it’s actually an easy process that can be done by anyone. Remember to reset your printer’s drum counter and override its settings if necessary.
We hope you found this tutorial informative and helpful. Don’t hesitate to share it with your friends or colleagues who might need assistance with their printer.
If you are looking for Tutorial : Brother Printer Replace Drum and Reset Counter, toner override you’ve came to the right place. We have 1 Images about Tutorial : Brother Printer Replace Drum and Reset Counter, toner override like Tutorial : Brother Printer Replace Drum and Reset Counter, toner override and also Tutorial : Brother Printer Replace Drum and Reset Counter, toner override. Here it is:
Tutorial : Brother Printer Replace Drum And Reset Counter, Toner Override
Override counter. Tutorial : brother printer replace drum and reset counter, toner override